Hi Kim,
Sorry for not reacting earlier. It's just that it didn't look like a
two-three minute assessment and reply
This simple diagram has clarified
your points.
The hub setup was originally intended for radio program exchange within a
radio network (http://trac.campware.org/campcaster/wiki/networkHub). I
think that you. What you are describing there is more in line with the
http://trac.campware.org/campcaster/wiki/TwoComputerSetup), except that you
have three computers. I'd be curious to see if it worked.
Again, sorry for not replying earlier.
All the best,
Sava
From: "Kim Vejnaa Hansen"
To:
Date: 05/13/2009 05:49 PM
Subject: No replies to problem in forum
Hi Campware guys
I have tried to ask this question twice in the forums, and no one gives any
answers.
There is no answer in any of the documentation - so im very lost on the
problem.
I hope one of you have 2 minutes to help me along a little...
We have a setup which will contain 3 campcaster installations
1 which works as HUB and Schedules broadcasts
and 2 which is studio versions.
STUDIO COMP. 1 ]
-----------------------------------> HUB
COMP. / SCHEDULER
STUDIO COMP. 2 ]
I would like the studio versions to connect to the HUB - but
cannot find any documentation on how to set it up in the campcaster studio
versions.
I use the 1.4 beta version
Which configuration files must be configured to have the two studio
machines using the
scheduler as HUB ?
I hope its okay I ask you - and that you have the answer, since I have
tried to get answers from the
forums with No luck unfortunately...
Thanks in advance for your help
Kim Hansen
Denmark
Sorry for not reacting earlier. It's just that it didn't look like a
two-three minute assessment and reply

your points.
The hub setup was originally intended for radio program exchange within a
radio network (http://trac.campware.org/campcaster/wiki/networkHub). I
think that you. What you are describing there is more in line with the
http://trac.campware.org/campcaster/wiki/TwoComputerSetup), except that you
have three computers. I'd be curious to see if it worked.
Again, sorry for not replying earlier.
All the best,
Sava
From: "Kim Vejnaa Hansen"
To:
Date: 05/13/2009 05:49 PM
Subject: No replies to problem in forum
Hi Campware guys
I have tried to ask this question twice in the forums, and no one gives any
answers.
There is no answer in any of the documentation - so im very lost on the
problem.
I hope one of you have 2 minutes to help me along a little...
We have a setup which will contain 3 campcaster installations
1 which works as HUB and Schedules broadcasts
and 2 which is studio versions.
STUDIO COMP. 1 ]
-----------------------------------> HUB
COMP. / SCHEDULER
STUDIO COMP. 2 ]
I would like the studio versions to connect to the HUB - but
cannot find any documentation on how to set it up in the campcaster studio
versions.
I use the 1.4 beta version
Which configuration files must be configured to have the two studio
machines using the
scheduler as HUB ?
I hope its okay I ask you - and that you have the answer, since I have
tried to get answers from the
forums with No luck unfortunately...
Thanks in advance for your help
Kim Hansen
Denmark